Important

This documentation covers IPython versions 6.0 and higher. Beginning with version 6.0, IPython stopped supporting compatibility with Python versions lower than 3.3 including all versions of Python 2.7.

If you are looking for an IPython version compatible with Python 2.7, please use the IPython 5.x LTS release and refer to its documentation (LTS is the long term support release).

Note

This page has been kept for historical reason. You most likely want to use Xonsh instead of this.

IPython as a system shell

Overview

It is possible to adapt IPython for system shell usage. In the past, IPython shipped a special ‘sh’ profile for this purpose, but it had been quarantined since 0.11 release, and in 1.0 it was removed altogether. Nevertheless, much of this section relies on machinery which does not require a custom profile.

You can set up your own ‘sh’ profile to be different from the default profile such that:

  • Prompt shows the current directory (see Prompt customization)

  • Make system commands directly available (in alias table) by running the %rehashx magic. If you install new programs along your PATH, you might want to run %rehashx to update the alias table

  • turn %autocall to full mode

Environment variables

Rather than manipulating os.environ directly, you may like to use the magic %env command. With no arguments, this displays all environment variables and values. To get the value of a specific variable, use %env var. To set the value of a specific variable, use %env foo bar, %env foo=bar. By default values are considered to be strings so quoting them is unnecessary. However, Python variables are expanded as usual in the magic command, so %env foo=$bar means “set the environment variable foo to the value of the Python variable bar”.

Aliases

Once you run %rehashx, all of your $PATH has been loaded as IPython aliases, so you should be able to type any normal system command and have it executed. See %alias? and %unalias? for details on the alias facilities. See also %rehashx? for details on the mechanism used to load $PATH.

Warning

See info at the top of the page. You most likely want to use Xonsh instead of this.

Directory management

Since each command passed by IPython to the underlying system is executed in a subshell which exits immediately, you can NOT use !cd to navigate the filesystem.

IPython provides its own builtin %cd magic command to move in the filesystem (the % is not required with automagic on). It also maintains a list of visited directories (use %dhist to see it) and allows direct switching to any of them. Type cd? for more details.

%pushd, %popd and %dirs are provided for directory stack handling.

Prompt customization

See Custom Prompts.

String lists

String lists (IPython.utils.text.SList) are handy way to process output from system commands. They are produced by var = !cmd syntax.

First, we acquire the output of ‘ls -l’:

[Q:doc/examples]|2> lines = !ls -l
 ==
['total 23',
 '-rw-rw-rw- 1 ville None 1163 Sep 30  2006 example-demo.py',
 '-rw-rw-rw- 1 ville None 1927 Sep 30  2006 example-embed-short.py',
 '-rwxrwxrwx 1 ville None 4606 Sep  1 17:15 example-embed.py',
 '-rwxrwxrwx 1 ville None 1017 Sep 30  2006 example-gnuplot.py',
 '-rwxrwxrwx 1 ville None  339 Jun 11 18:01 extension.py',
 '-rwxrwxrwx 1 ville None  113 Dec 20  2006 seteditor.py',
 '-rwxrwxrwx 1 ville None  245 Dec 12  2006 seteditor.pyc']

Now, let’s take a look at the contents of ‘lines’ (the first number is the list element number):

[Q:doc/examples]|3> lines
                <3> SList (.p, .n, .l, .s, .grep(), .fields() available). Value:

0: total 23
1: -rw-rw-rw- 1 ville None 1163 Sep 30  2006 example-demo.py
2: -rw-rw-rw- 1 ville None 1927 Sep 30  2006 example-embed-short.py
3: -rwxrwxrwx 1 ville None 4606 Sep  1 17:15 example-embed.py
4: -rwxrwxrwx 1 ville None 1017 Sep 30  2006 example-gnuplot.py
5: -rwxrwxrwx 1 ville None  339 Jun 11 18:01 extension.py
6: -rwxrwxrwx 1 ville None  113 Dec 20  2006 seteditor.py
7: -rwxrwxrwx 1 ville None  245 Dec 12  2006 seteditor.pyc

Now, let’s filter out the ‘embed’ lines:

[Q:doc/examples]|4> l2 = lines.grep('embed',prune=1)
[Q:doc/examples]|5> l2
                <5> SList (.p, .n, .l, .s, .grep(), .fields() available). Value:

0: total 23
1: -rw-rw-rw- 1 ville None 1163 Sep 30  2006 example-demo.py
2: -rwxrwxrwx 1 ville None 1017 Sep 30  2006 example-gnuplot.py
3: -rwxrwxrwx 1 ville None  339 Jun 11 18:01 extension.py
4: -rwxrwxrwx 1 ville None  113 Dec 20  2006 seteditor.py
5: -rwxrwxrwx 1 ville None  245 Dec 12  2006 seteditor.pyc

Now, we want strings having just file names and permissions:

[Q:doc/examples]|6> l2.fields(8,0)
                <6> SList (.p, .n, .l, .s, .grep(), .fields() available). Value:

0: total
1: example-demo.py -rw-rw-rw-
2: example-gnuplot.py -rwxrwxrwx
3: extension.py -rwxrwxrwx
4: seteditor.py -rwxrwxrwx
5: seteditor.pyc -rwxrwxrwx

Note how the line with ‘total’ does not raise IndexError.

If you want to split these (yielding lists), call fields() without arguments:

[Q:doc/examples]|7> _.fields()
                <7>
[['total'],
 ['example-demo.py', '-rw-rw-rw-'],
 ['example-gnuplot.py', '-rwxrwxrwx'],
 ['extension.py', '-rwxrwxrwx'],
 ['seteditor.py', '-rwxrwxrwx'],
 ['seteditor.pyc', '-rwxrwxrwx']]

If you want to pass these separated with spaces to a command (typical for lists if files), use the .s property:

[Q:doc/examples]|13> files = l2.fields(8).s
[Q:doc/examples]|14> files
                <14> 'example-demo.py example-gnuplot.py extension.py seteditor.py seteditor.pyc'
[Q:doc/examples]|15> ls $files
example-demo.py  example-gnuplot.py  extension.py  seteditor.py  seteditor.pyc

SLists are inherited from normal Python lists, so every list method is available:

[Q:doc/examples]|21> lines.append('hey')

Real world example: remove all files outside version control

First, capture output of “hg status”:

[Q:/ipython]|28> out = !hg status
 ==
['M IPython\\extensions\\ipy_kitcfg.py',
 'M IPython\\extensions\\ipy_rehashdir.py',
...
 '? build\\lib\\IPython\\Debugger.py',
 '? build\\lib\\IPython\\extensions\\InterpreterExec.py',
 '? build\\lib\\IPython\\extensions\\InterpreterPasteInput.py',
...

(lines starting with ? are not under version control).

[Q:/ipython]|35> junk = out.grep(r'^\?').fields(1)
[Q:/ipython]|36> junk
            <36> SList (.p, .n, .l, .s, .grep(), .fields() availab
...
10: build\bdist.win32\winexe\temp\_ctypes.py
11: build\bdist.win32\winexe\temp\_hashlib.py
12: build\bdist.win32\winexe\temp\_socket.py

Now we can just remove these files by doing ‘rm $junk.s’.

The .n, .s, .p properties

Properties of SList wrapper provide a convenient ways to use contained text in different formats:

  • .n returns (original) string with lines separated by a newline

  • .s returns string with lines separated by single space (for convenient passing to system commands)

  • .p returns list of “path” objects from detected file names

Error

You went too far scroll back up. You most likely want to use Xonsh instead of this.